[BC] computer question

[Neal Newman]

Belkin makes a unit that has 2 transceivers  that connect a remote 
monitor mouse and keyboard
 that Inter connect via a Point to point CAT5 Cable  not sure Of the 
model  I will check when I go to the studios.
Anyway  you Connect One unit behind the PC. it allows local  keyboard 
and mouse..
 connect the CAT5 between the 2 units( 50+ feet away) and Connect a 
monitor keyboard and mouse.at the remote side  and your Rocking.... I 
use these units between the studios and my Racks in my Office with all 
the Computers.
 I will look for the info for you.... Its  great. NO computers out in 
the office  Everything is rack mounted. just a keyboard/mouse monitor at 
the desk.  its almost like the old Pinical units

BTW  I still like the stuff from P.E. Engineering also..

Neal-CE WTTM


Stu Engelke wrote:

> Will Ultra VNC work? then you can control it from anywhere on your 
> network.
> Stu
>
> John Vodenik wrote:
>
>> Hello most worthy brain trust, and RF guys also,
>>
>> I have a problem (again) with computer technology.
>> I just installed a 64 X 64 audio router, but can't use it because
>> the mouse won't work!!  Here is the situation:
>>
>> The operator is some 50 feet from the router computer. This thing is 
>> rack mounted,
>> and there is also another exact same type computer that IS working. 
>> The difference is op systems.
>> The working unit is WIN NT, the in-op system is WIN XP PRO.  I have 
>> 50 foot extention cables
>> on the keyboard and mouse of the XP unit.  The keyboard works, but 
>> not the mouse. I reversed the kyboard and mouse cables, same result. 
>> To check, I moved the mouse cable from the OPERATING computer (NT) to 
>> the XP unit.  The mouse quit working. Move it back, all is happy.
>>
>> Our computer "expert", who the government has spent 30K $$ on for 
>> computer training, doesn't have
>> any idea why it won't work.  I have always gotten excellent advice 
>> from this group.
>>
>> The router can be controlled from the rack mounted mouse/keyboard, 
>> and with a "real" mouse plugged in.
>> I can't make the final connections until I can operate the system 
>> from the operator's console. I need to remove the audio lines from 
>> the old 3-M system and move them to the SAS 32KD system.
>>
>> Anywho..thanks for any and all help.
>>
>> John @ VOA / Delano
>>
>>
>> _______________________________________________
>> This is the BROADCAST mailing list
>> To send to the list, email: broadcast at radiolists.net
>> For sub changes, archives and info on this other lists: 
>> http://www.radiolists.net/
>>
>>
>