[BC] Sta-Level

DANA PUOPOLO dpuopolo
Sun Jun 4 19:53:00 CDT 2006


I'd likely have to bake it. It's Shamrock Acetate 1.5 mil.

-D



------ Original Message ------
Received: Sun, 04 Jun 2006 04:57:51 PM PDT
From: "Stevan A. White" <w5saw at pathwayz.com>
To: "'Broadcasters' Mailing List'" <broadcast at radiolists.net>
Subject: RE: [BC] Sta-Level

Can you still play the tape as-is or would you have to bake it first?

Best Regards,
Steve White, W5SAW
SW Commercial Electronics


-----Original Message-----
From: DANA PUOPOLO [mailto:dpuopolo at usa.net] 
Sent: Sunday, June 04, 2006 8:21 AM
To: Broadcasters' Mailing List
Subject: Re: [BC] Sta-Level


I have a Dr. Hook interview that I ran the board for from 1973.

The board was a Gates Yard, compressor was a Gates Sta Level (10 db or so
compression; single release time), mikes were RE-16's and it was recorded
full track mono on an Ampex 350. It still sounds great!

-D

------ Original Message ------
Received: Sun, 04 Jun 2006 06:10:48 AM PDT
From: Robert Orban <rorban at earthlink.net>
To: broadcast at radiolists.net
Subject: Re: [BC] Sta-Level

At 07:38 PM 6/3/2006, you wrote:
>From: "Steve" <shnewman at alaweb.com>
>Subject: Re: [BC] Sta-Level
>To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
>Message-ID: <000b01c6876e$37a83280$b302a8c0 at walker>
>Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>         reply-type=original
>
>
>
>I remember going to a rather large recording studio in Hollywood and 
>saw a rack of RCA Limiters. (tons of them) Those units probably date 
>from the 40's/50's. They were there for a reason. Two additional notes. 
>First, if you have a radio format where an older unit will give you the 
>sound you want then use it. Even Bob Orban, in as many words, said that 
>when he commented on the Sta-Level.

Moreover, my comments were not based on some half-remembered experience 
from the '60s. I heard a Sta-Level quite recently, and it sounded like I 
remembered it -- smooth, warm, and easy to listen to. I have always 
wondered if the engineer(s) at Gates who designed this knew exactly what 
they had going, or if the nice sound just happened by good luck.

Bob Orban 



_______________________________________________
This is the BROADCAST mailing list
To send to the list, email: broadcast at radiolists.net
For sub changes, archives and info on this other lists:
http://www.radiolists.net/








_______________________________________________
This is the BROADCAST mailing list
To send to the list, email: broadcast at radiolists.net
For sub changes, archives and info on this other lists:
http://www.radiolists.net/






More information about the Broadcast mailing list