[BC] Car Radio Audio connectors...

[Burt I. Weiner]

It would really be nice if there was an "Ext Audio" input (standard 
type) spigot such as a mini TRS plug on the front, not the rear, of 
car radios so that you could easily plug any device into the car 
audio system.  Not only would it make them more universal but would 
probably go a long way towards mitigating interference complaints 
from the micro-transmitters.

Burt


At 06:27 PM 6/24/2006, you wrote:
>From: DHultsman5 at aol.com
>Subject: Re: [BC] FM Modulators for Satellite Radio
>To: broadcast at radiolists.net
>Message-ID: <520.176bfa1.31ce7d61 at aol.com>
>Content-Type: text/plain; charset="US-ASCII"
>
>
>In a message dated 6/23/2006 2:38:17 PM Central Daylight Time,
>mark3xy at gmail.com writes:
>
>Speaking  of connectors, I'm rather disappointed that iBiquity hasn't
>required all HD  receiver manufacturers to include an output port for
>the "raw" data stream,  which would allow adapters to be interfaced as
>new applications( such as  enchanced PAD, traffic reports, etc.) are
>developed in the  future.   Many of the '70s vintage analog tuners at
>least offered  a wideband composite output in case "quad" adapters  were

Burt I. Weiner Associates
Broadcast Technical Services
Glendale, California  U.S.A.
biwa at earthlink.net
K6OQK