[BC] Part 15 LPAM Questions?

[Robert Meuser]

It is not the power, it is the resistive loss that is the design factor.

R


WFIFeng at aol.com wrote:

>In a message dated 09/10/2006 5:19:40 PM Eastern Daylight Time, 
>tonne at comcast.net writes:
>
>  
>
>>As was pointed out, the problem is  *matching*  the 
>> impedance with a network because the required
>> inductance will be very lossy.  And, not pointed out,
>> is that the resulting final network will be very 
>> narrowband.
>>    
>>
>
>Don't thay use a torroid with fairly heavy wire in the Rangemaster? We're 
>only talking 100mw here, not tens of watts.
>
>Willie...
>_______________________________________________
>
>The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
>Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
>www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>
>  
>