[BC] Another Old Meter pannel

[Alan Alsobrook]

Willie,
That's my old Cobra 29GTL, it still works and I do put it back in the 
car on every now and then for a road trip.  Down the way you'll see my 
original base station a Pace 1000B Crystal controlled 23 ch. It still 
works too. If you care to take a look down the west wall of the shop 
here's a brief tour. (pictures are A-F) Just edit the link for each pic.

http://sbe7.org/pics/WWA.JPG



WFIFeng at aol.com wrote:

> I also see what looks like a CB rig. If it uses a PLL02A chip, all you have 
> to do is ground a pin (it is usually left floating- I forget which pin it is, 
> (it's on the side away from the channel switch) to put the rig up onto 10 
> meters. It's actually a pretty amazing little chip! That pin sets the chip from 
> 10Khz steps to 5. In doing that, it also drastically changes the frequency, 
> usually ending up well into the 10 meter band. A little tweaking, and you're done.

-- 
Alan Alsobrook CSRE AMD CBNT
St. Augustine Fl. 32086 904-829-8885
aalso at Bellsouth.net