[BC] Marti HRC-10A replacement

[Chris Oradat]

As one of the 'whippersnappers', I understand the value of an analog backup
path.  You may not have all the functionally of these new fangled digital
boxes, but analog just seems to _want_ to work.

--
Chris Oradat

-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Tom
Sent: Monday, January 14, 2008 11:33 AM
To: Broadcasters' Mailing List
Subject: Re: [BC] Marti HRC-10A replacement

Go Composite.  Use one as hot standby.  Relicense as/if necessary.

Or, those young whippersnappers may say take the backup digital.  I 
prefer analog; no coding delays.

Tom S.

engineermike wrote:
> Hey folks,
>  It appears my old HRC-10A STL combiner has finally bit the dust or 
> almost anyway.  Everything looks good on the STL's but on the receive 
> end my left channel is about 10% pwr while the right channel is 110%.  
> I tried swapping the cables from the splitter and checking several 
> other things such as attenuation on the receivers and everything looks 
> good so the only thing left that I can imagine is this combiner.  At 
> the moment I don't have any of the proper test equipment to confirm 
> this.  So with that said what do you guys use in a case like this.  
> Two mono STL units that are a back up to our digital link.  I do have 
> a call in to BE to see what Marti now suggests and their cost.
> Thanks in advance
> Mike
_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore - Your Premium
Supplier Of Components To Build and Maintain A Technical Infrastructure
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com