[BC] 3 phase to single phase conversion

[SteveOrdinetz]

Chuck Lakaytis <chuck at akpb.org> wrote:
> The bearings have Zerk fittings.  DO NOT
> GREASE THE BEARINGS in normal use. None of the bearings on the units I had
> were ever greased.  And if they do need to be greased for some reason you
> must use a special grease, not the ordinary chassis grease.
>

It's been a few years since I worked with a Kay RPC, but IIRC the
factory recommended that you DO grease them once a year (though the
manual did state to go easy on the grease).
I forget what the recommended grease was, but it was something I was
able to get at an auto parts store.