[BC] BE FM10A

[Bill Allen Jr]

Anyone got a metering board for the BE fm10A for sale?

called BE and ordered one by part number and they shipped a built "substitute" cuz' the real one is no longer available.

the sub wasn't even close!

i need the board that screws directly to the filament bypass cap's (both) and the wires for the xmtr have ring terminals.

the sub they sent has tab terms on it and does not screw to the cap's.

i would rebuild the bd myself but, would rather put in a different board while i'm doing it (why would be put the screen fuseable link on a metering bd?).

btw, has anyone had an fm 10a's plate voltage meter circuit go bad with no plate volt's measured?

i replaced all the resistors in the plate meter multiplier board and the diode,cap and small resistor tests good.

the meter tests good as does all the wiring and still no plate voltage on the meter.

disconned the telem wiring and APC suspecting a short and still no plate volts on the meter.
  
am missing something or do i have to buy this xmtr dinner!

Bill